How to correctly use the angle grinder to operate the grinding wheel

1. Preparatory work: Before using the angle grinder to operate the grinding wheel, it is necessary to confirm whether the model, material, specification and speed of the grinding wheel meet the work requirements. The grinding wheel must be installed in strict accordance with the regulations, and check whether the installation is firm and whether the appearance is worn or damaged. Abnormal conditions such as cracks.

2. Wear necessary protective equipment: When using an angle grinder, wear necessary protective equipment, such as goggles, earplugs, gloves, etc.

3. Turn on the power supply: When using the angle grinder, you need to turn on the power supply, and pay attention to check whether the wire is damaged or heated to avoid accidents.

4. Adjust the speed and angle: adjust the speed and angle of the grinding wheel according to the needs of the work. After adjustment, use it to rotate to ensure the accuracy of the operation.

5. Hit the grinding wheel: During the rotation of the grinding wheel, you need to hit the grinding wheel lightly to make it run smoothly and improve work efficiency.

6. Practice correct operation: When operating the grinding wheel correctly, you need to keep your hand firmly, and you can't put your fingers on both sides of the grinding wheel. Danger.

7. Check the grinding wheel: After using for a period of time, you need to check whether the grinding wheel is worn or deformed. If there is any abnormality, you need to replace it immediately. At the same time, it is necessary to pay attention to the drawing requirements and master the common sense of grinding wheel products and use.

8. Shutdown and cleaning: After the work is completed, turn off the angle grinder, clean the grinding wheel and the surface of the machine, and store it in a dry and ventilated place for the next use.